This is the config that I am running.
Thanks for the help.
This is the config that I am running.
Thanks for the help.
It is correct already, I copied the line slightly wrong from the screen.
Sorry I am not sure what you want me to do next? Thanks for the help
Sorry those are just additional spaces put in by the image capture software it is running the driver you suggest.
The annoying thing is it works perfectly for two or three days before stopping.
File Edit Tabs Help pi@raspberrypi:- $ cat /boot/config.txt |grep
#dtoverlay=gpio-ir, gpio_pin=17
#dtoverlay=gpio-ir-tx, gpio_pin=18
dtoverlay=vc4-fkms -v3d
#dtoverlay=vc4-fkms -v3d
pi@raspberrypi:~ $
Came out from the command.
Thanks
Nothing comes up from the EXT-Alert. However the screen remains blank when I login via VNC on the Remote Desktop and the normal screen.
Have have had this installed for a while. It all works perfectly for few days and then stops waking up when you approach. If I login using VNC the screen in blank but using the keyboard to refresh Magic Mirror it all starts working again.
Any ideas please?
Running on a RPi 3B+