I have EXT-Pir and EXT-Screen installed. Here’s my configuration:

{ module: "EXT-Screen", position: "bottom_left", config: { debug: true, delay: 3 * 60 * 1000, autoHide: false, displayCounter: true, displayBar: true, displayStyle: "Text", displayLastPresence: false } }, { module: "EXT-Pir", config: { debug: true, gpio: 14 } },

I am able to use <gpio readall> over SSH to my rpi to confirm that when I move around the room, BCM port number 14 changes from 0 to 1.

I have run update.sh and npm rebuild in the EXT-Pir folder.

However, no EXT-Pir output appears anywhere in the logs, and when the sensor is triggered, the screen off countdown does not reset.

Anything I should try to fix this?

hello. The sensor detects presence when it detects someone, and when it reaches the end of the countdown, the screen closes. but then it turns back on.

I updated my mirror to the latest version of MM and now my motion sensor has stopped working. EXT-Screen is working fine, it puts my mirror to sleep on time but it won’t come back.

I have checked that my PIR sensor is working using this code and it behaves as expected.

I have the PIR sensor set up on GPIO 21 in config.js

from gpiozero import MotionSensor

pir = MotionSensor(21)

while True:
pir.wait_for_motion()
print(“Motion detected!”)

Good day,

Again, many thanks for all the wonderful modules.
The new GA is a treat to install compared to older versions.

My MagicMirror is up and running for a couple of month’s now and the Ext-Screen and Ext-Pir have worked flawless.

Today I installed GA (as per tutorial, so also installed EXT-gateway and EXT-detector). GA works like it should. The Pir module also turns down the screen after the set time. Most be honest I’m not sure it still has the 5 minutes I’ve set. It
But most of the time it won’t wake up anymore. On some rare occasions it will, but this involves rebooting or restarting the MagicMirror. Magic Mirror still runs when it stays blank, as can be seen by the MMM-Remote-Controle. The Pi works with SSH and Magic Mirror can be stopped which immediately shows the normal Pi environment.

EXT-Pir start without any errors:

[03.05.2022 19:54.25.475] [LOG] [PIR] All needed @bugsounet library loaded ! [03.05.2022 19:54.25.478] [LOG] [PIR] PIR Library v1.1.0 Initialized... [03.05.2022 19:54.25.511] [LOG] [PIR] Initialize Complete Version: 1.0.1 rev: 220403

Also EXT-Screen doesn’t give an error:

[03.05.2022 20:06.44.330] [LOG] [SCREEN] EXT-Screen Version: 1.1.1 rev: 220403 [03.05.2022 20:06.44.333] [LOG] [SCREEN] Mode 1: vcgencmd [03.05.2022 20:06.44.384] [LOG] [SCREEN] Initialized

PM2 Log also doesn’t show any error’s or problems.

I’m a bit lost where to look. Is there something embedded in the GA module which I didn’t see? Can someone point me in the right direction please?

Regards Robert

Forum Members,

I am a past user of MMM-NewPIR that used to work great. I am now trying to migrate to EXT-Screen and EXT-Pir to turn the display on and off based on motion near the Mirror.

I have installed EXT-Screen and EXT-Pir and below are my configs. The logs show PIR is activated and it shows notifications when someone walks by but the display does not turn off after inactivity. Can you please help? I realise this is a very simple case that should work out of the box but I am having issues and I have read through the wiki 😞

Config.js

{ module: "EXT-Screen", position: "top_center", config: { debug: true, delay: 2 * 60 * 1000, turnOffDisplay: true, mode: 1, displayStyle: "SemiCircle", } }, { module: "EXT-Pir", config: { debug: true, gpio: 17, reverseValue: false } },

Logs

[03.05.2022 21:10.46.281] [LOG] No helper found for module: EXT-Screen. [03.05.2022 21:10.46.288] [LOG] Initializing new module helper ... [03.05.2022 21:10.46.290] [LOG] Module helper loaded: EXT-Pir [03.05.2022 21:10.46.307] [LOG] Initializing new module helper ... . . . 03.05.2022 21:10.51.689] [LOG] [PIR] Initialize... [03.05.2022 21:10.51.776] [LOG] [PIR] Loaded ./lib/pirLib.js [03.05.2022 21:10.51.832] [LOG] [PIR] All needed @bugsounet library loaded ! [03.05.2022 21:10.51.834] [LOG] [PIR] PIR Library v1.1.0 Initialized... [03.05.2022 21:10.51.842] [LOG] [PIR] Callback Notification: PIR_INITIALIZED [03.05.2022 21:10.51.844] [LOG] [PIR] Start [03.05.2022 21:10.51.855] [LOG] [PIR] Callback Notification: PIR_STARTED [03.05.2022 21:10.51.860] [LOG] [PIR] Initialize Complete Version: 1.0.1 rev: 220403 . . . . [03.05.2022 21:12.24.512] [LOG] [PIR] Sensor read value: 1 [03.05.2022 21:12.24.523] [LOG] [PIR] Callback Notification: PIR_DETECTED [03.05.2022 21:12.24.524] [LOG] [PIR] Detected presence (value: 1) [03.05.2022 21:12.32.672] [LOG] [PIR] Sensor read value: 1 [03.05.2022 21:12.32.678] [LOG] [PIR] Callback Notification: PIR_DETECTED [03.05.2022 21:12.32.680] [LOG] [PIR] Detected presence (value: 1)

I posted my problem in the Thread before but didn’t get a solution.

EXT-Alert report an error, so I rebuild the module:

pi@raspberrypi:~/MagicMirror/modules/EXT-Pir $ npm run rebuild > EXT-Pir@1.0.1 rebuild /home/pi/MagicMirror/modules/EXT-Pir > installer/rebuild.sh Welcome to EXT-Pir rebuild script This script will erase current build and reinstall it Do you want to continue ? [Y/n] Your choice: y Deleting: package-lock.json node_modules Done. Upgrading EXT-Pir... HEAD ist jetzt bei e368238 delete pir library Bereits aktuell. Done. Reinstalling EXT-Pir... > EXT-Pir@1.0.1 preinstall /home/pi/MagicMirror/modules/EXT-Pir > installer/preinstall.sh Welcome to EXT-Pir v1.0.1 No root checking... Checking EXT-Pir: pi/pi Checking MagicMirror: pi/pi Checking OS... OS Detected: linux-gnueabihf (raspbian 10 armv7l) Installing all npm libraries... npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142 npm WARN deprecated har-validator@5.1.5: this library is no longer supported > epoll@4.0.1 install /home/pi/MagicMirror/modules/EXT-Pir/node_modules/epoll > node-gyp rebuild make: Verzeichnis „/home/pi/MagicMirror/modules/EXT-Pir/node_modules/epoll/build“ wird betreten CXX(target) Release/obj.target/epoll/src/epoll.o pi@raspberrypi:~/MagicMirror/modules/EXT-Pir $ npm run rebuild > EXT-Pir@1.0.1 rebuild /home/pi/MagicMirror/modules/EXT-Pir > installer/rebuild.sh Welcome to EXT-Pir rebuild script This script will erase current build and reinstall it Do you want to continue ? [Y/n] Your choice: y Deleting: package-lock.json node_modules Done. Upgrading EXT-Pir... HEAD ist jetzt bei e368238 delete pir library Bereits aktuell. Done. Reinstalling EXT-Pir... > EXT-Pir@1.0.1 preinstall /home/pi/MagicMirror/modules/EXT-Pir > installer/preinstall.sh Welcome to EXT-Pir v1.0.1 No root checking... Checking EXT-Pir: pi/pi Checking MagicMirror: pi/pi Checking OS... OS Detected: linux-gnueabihf (raspbian 10 armv7l) Installing all npm libraries... npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142 npm WARN deprecated har-validator@5.1.5: this library is no longer supported > epoll@4.0.1 install /home/pi/MagicMirror/modules/EXT-Pir/node_modules/epoll > node-gyp rebuild SOLINK_MODULE(target) Release/obj.target/epoll.node COPY Release/epoll.node make: Verzeichnis „/home/pi/MagicMirror/modules/EXT-Pir/node_modules/epoll/build“ wird verlassen > EXT-Pir@1.0.1 postinstall /home/pi/MagicMirror/modules/EXT-Pir > installer/postinstall.sh Prepare PIR sensor using Done Rebuilding MagicMirror... ⠋ MagicMirror Building module: epoll, Completed: 0make: Verzeichnis „/home/pi/MagicMirror/modules/EXT-Pir/node_modules/epoll/build“ wird betreten CXX(target) Release/obj.target/epoll/src/epoll.o ⠼ MagicMirror Building module: epoll, Completed: 0 SOLINK_MODULE(target) Release/obj.target/epoll.node ⠋ MagicMirror Building module: epoll, Completed: 0 COPY Release/epoll.node make: Verzeichnis „/home/pi/MagicMirror/modules/EXT-Pir/node_modules/epoll/build“ wird verlassen ✔ MagicMirror Rebuild Complete Support is now moved in a dedicated Server: https://forum.bugsounet.fr @bugsounet EXT-Pir is now installed ! npm notice created a lockfile as package-lock.json. You should commit this file. added 195 packages from 173 contributors and audited 195 packages in 75.783s 22 packages are looking for funding run `npm fund` for details found 0 vulnerabilities

The Version of node, npm and mm is supported and the gpio pin works in an other script

Hi @bugsounet and @all
Because MMM-PIR-Sensor isn’t maintened anymore, I want to switch on EXT-Screen and EXT-Pir to power on my screen only on move detection of my PIR Sensor.

EXT-Screen seem functionnal, my screen is on during the delay, and next it switch off.

First problem :
When i was using MMM-Pir-Sensor, the screen was displaying “Please verify VGA” and turn off after few second only.
With Ext-Screen, the same message is displayed during 1 minute (or more), then switch off…Do you know why they are now this important delay before really switch off ?

Second problem :
EXT-Pir doesn’t wake up the screen…The GPIO is correct, but my screen doesn’t power on.

Maybe an important detail : During the installation of the two module, an error is displayed. Please see attach log.
It’s because 2.19, or maybe the version of node or npm ?

here’s my config :

pi@MagicMirror:~/MagicMirror $ cat package.json | grep version "version": "2.19.0", pi@MagicMirror:~/MagicMirror/config $ npm --version 8.1.4 pi@MagicMirror:~/MagicMirror/config $ node --version v16.13.0

My config.js

{ module: 'EXT-Screen', position: 'top_left', config: { delay: 30000, animateBody: false, ecoMode: false, mode: 1 } }, { module: 'EXT-Pir', config: { debug: yes, gpio: 21, reverseValue: false } },

The error during the installation of EXT-Screen

pi@MagicMirror:~/MagicMirror/modules/EXT-Screen $ npm install > EXT-Screen@1.1.0 preinstall > installer/preinstall.sh Welcome to EXT-Screen v1.1.0 No root checking... Checking EXT-Screen: pi/pi Checking MagicMirror: pi/root npm ERR! code 255 npm ERR! path /home/pi/MagicMirror/modules/EXT-Screen npm ERR! command failed npm ERR! command sh -c installer/preinstall.sh npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2022-04-03T15_11_08_697Z-debug.log

and associated logs

pi@MagicMirror:~/MagicMirror/modules/EXT-Screen $ cat /home/pi/.npm/_logs/2022-04-03T15_11_08_697Z-debug.log 0 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'install' ] 1 info using npm@8.1.4 2 info using node@v16.13.0 3 timing npm:load:whichnode Completed in 0ms 4 timing config:load:defaults Completed in 9ms 5 timing config:load:file:/usr/lib/node_modules/npm/npmrc Completed in 3ms 6 timing config:load:builtin Completed in 4ms 7 timing config:load:cli Completed in 8ms 8 timing config:load:env Completed in 2ms 9 timing config:load:file:/home/pi/MagicMirror/modules/EXT-Screen/.npmrc Completed in 1ms 10 timing config:load:project Completed in 9ms 11 timing config:load:file:/home/pi/.npmrc Completed in 0ms 12 timing config:load:user Completed in 1ms 13 timing config:load:file:/usr/etc/npmrc Completed in 0ms 14 timing config:load:global Completed in 1ms 15 timing config:load:validate Completed in 0ms 16 timing config:load:credentials Completed in 6ms 17 timing config:load:setEnvs Completed in 4ms 18 timing config:load Completed in 49ms 19 timing npm:load:configload Completed in 49ms 20 timing npm:load:setTitle Completed in 0ms 21 timing npm:load:setupLog Completed in 1ms 22 timing config:load:flatten Completed in 16ms 23 timing npm:load:cleanupLog Completed in 10ms 24 timing npm:load:configScope Completed in 0ms 25 timing npm:load:projectScope Completed in 2ms 26 timing npm:load Completed in 90ms 27 timing arborist:ctor Completed in 4ms 28 timing idealTree:init Completed in 109ms 29 timing idealTree:userRequests Completed in 1ms 30 silly idealTree buildDeps 31 timing idealTree:#root Completed in 1ms 32 timing idealTree:buildDeps Completed in 6ms 33 timing idealTree:fixDepFlags Completed in 0ms 34 timing idealTree Completed in 124ms 35 timing arborist:ctor Completed in 1ms 36 timing reify:loadTrees Completed in 182ms 37 timing reify:diffTrees Completed in 9ms 38 silly reify moves {} 39 timing reify:retireShallow Completed in 1ms 40 timing reify:createSparse Completed in 0ms 41 timing reify:loadBundles Completed in 0ms 42 silly audit bulk request { 42 silly audit '@bugsounet/screen': [ '1.1.9' ], 42 silly audit child_process: [ '1.0.2' ], 42 silly audit moment: [ '2.29.2' ], 42 silly audit process: [ '0.11.10' ] 42 silly audit } 43 timing reify:unpack Completed in 17ms 44 timing reify:unretire Completed in 0ms 45 timing build:queue Completed in 0ms 46 timing build:deps Completed in 2ms 47 timing build Completed in 3ms 48 timing reify:build Completed in 4ms 49 timing reify:trash Completed in 0ms 50 timing reify:save Completed in 46ms 51 http fetch POST 200 https://registry.npmjs.org/-/npm/v1/security/advisories/bulk 780ms 52 timing auditReport:getReport Completed in 789ms 53 silly audit report {} 54 timing auditReport:init Completed in 0ms 55 timing reify:audit Completed in 793ms 56 timing reify Completed in 1046ms 57 timing command:install Completed in 1208ms 58 verbose stack Error: command failed 58 verbose stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/@npmcli/promise-spawn/index.js:64:27) 58 verbose stack at ChildProcess.emit (node:events:390:28) 58 verbose stack at maybeClose (node:internal/child_process:1064:16) 58 verbose stack at Process.ChildProcess._handle.onexit (node:internal/child_process:301:5) 59 verbose pkgid EXT-Screen@1.1.0 60 verbose cwd /home/pi/MagicMirror/modules/EXT-Screen 61 verbose Linux 5.10.63-v7+ 62 verbose argv "/usr/bin/node" "/usr/bin/npm" "install" 63 verbose node v16.13.0 64 verbose npm v8.1.4 65 error code 255 66 error path /home/pi/MagicMirror/modules/EXT-Screen 67 error command failed 68 error command sh -c installer/preinstall.sh 69 verbose exit 255

The error during the installation of EXT-Pir

pi@MagicMirror:~/MagicMirror/modules/EXT-Pir $ npm install > EXT-Pir@1.0.1 preinstall > installer/preinstall.sh Welcome to EXT-Pir v1.0.1 No root checking... Checking EXT-Pir: pi/pi Checking MagicMirror: pi/root npm ERR! code 255 npm ERR! path /home/pi/MagicMirror/modules/EXT-Pir npm ERR! command failed npm ERR! command sh -c installer/preinstall.sh npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2022-04-03T15_12_07_756Z-debug.log

and associated logs

pi@MagicMirror:~/MagicMirror/modules/EXT-Pir $ cat /home/pi/.npm/_logs/2022-04-03T15_12_07_756Z-debug.log 0 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'install' ] 1 info using npm@8.1.4 2 info using node@v16.13.0 3 timing npm:load:whichnode Completed in 1ms 4 timing config:load:defaults Completed in 12ms 5 timing config:load:file:/usr/lib/node_modules/npm/npmrc Completed in 5ms 6 timing config:load:builtin Completed in 6ms 7 timing config:load:cli Completed in 13ms 8 timing config:load:env Completed in 2ms 9 timing config:load:file:/home/pi/MagicMirror/modules/EXT-Pir/.npmrc Completed in 1ms 10 timing config:load:project Completed in 13ms 11 timing config:load:file:/home/pi/.npmrc Completed in 0ms 12 timing config:load:user Completed in 2ms 13 timing config:load:file:/usr/etc/npmrc Completed in 1ms 14 timing config:load:global Completed in 2ms 15 timing config:load:validate Completed in 1ms 16 timing config:load:credentials Completed in 15ms 17 timing config:load:setEnvs Completed in 10ms 18 timing config:load Completed in 78ms 19 timing npm:load:configload Completed in 79ms 20 timing npm:load:setTitle Completed in 3ms 21 timing npm:load:setupLog Completed in 4ms 22 timing config:load:flatten Completed in 16ms 23 timing npm:load:cleanupLog Completed in 11ms 24 timing npm:load:configScope Completed in 0ms 25 timing npm:load:projectScope Completed in 19ms 26 timing npm:load Completed in 142ms 27 timing arborist:ctor Completed in 4ms 28 timing idealTree:init Completed in 1007ms 29 timing idealTree:userRequests Completed in 1ms 30 silly idealTree buildDeps 31 timing idealTree:#root Completed in 2ms 32 timing idealTree:buildDeps Completed in 9ms 33 timing idealTree:fixDepFlags Completed in 0ms 34 timing idealTree Completed in 1044ms 35 timing arborist:ctor Completed in 1ms 36 timing reify:loadTrees Completed in 1534ms 37 timing reify:diffTrees Completed in 37ms 38 silly reify moves {} 39 timing reify:retireShallow Completed in 1ms 40 timing reify:createSparse Completed in 0ms 41 timing reify:loadBundles Completed in 0ms 42 silly audit bulk request { 42 silly audit '@malept/cross-spawn-promise': [ '1.1.1' ], 42 silly audit '@sindresorhus/is': [ '4.6.0' ], 42 silly audit '@szmarczak/http-timer': [ '4.0.6' ], 42 silly audit '@types/cacheable-request': [ '6.0.2' ], 42 silly audit '@types/http-cache-semantics': [ '4.0.1' ], 42 silly audit '@types/json-buffer': [ '3.0.0' ], 42 silly audit '@types/keyv': [ '3.1.4' ], 42 silly audit '@types/node': [ '17.0.23' ], 42 silly audit '@types/responselike': [ '1.0.0' ], 42 silly audit abbrev: [ '1.1.1' ], 42 silly audit ajv: [ '6.12.6' ], 42 silly audit 'ansi-regex': [ '2.1.1', '5.0.1' ], 42 silly audit 'ansi-styles': [ '4.3.0' ], 42 silly audit aproba: [ '1.2.0' ], 42 silly audit 'are-we-there-yet': [ '1.1.7' ], 42 silly audit asn1: [ '0.2.6' ], 42 silly audit 'assert-plus': [ '1.0.0' ], 42 silly audit asynckit: [ '0.4.0' ], 42 silly audit 'at-least-node': [ '1.0.0' ], 42 silly audit 'aws-sign2': [ '0.7.0' ], 42 silly audit aws4: [ '1.11.0' ], 42 silly audit 'balanced-match': [ '1.0.2' ], 42 silly audit 'base64-js': [ '1.5.1' ], 42 silly audit 'bcrypt-pbkdf': [ '1.0.2' ], 42 silly audit bindings: [ '1.5.0' ], 42 silly audit bl: [ '4.1.0' ], 42 silly audit 'readable-stream': [ '3.6.0', '2.3.7' ], 42 silly audit 'brace-expansion': [ '1.1.11' ], 42 silly audit buffer: [ '5.7.1' ], 42 silly audit 'cacheable-lookup': [ '5.0.4' ], 42 silly audit 'cacheable-request': [ '7.0.2' ], 42 silly audit caseless: [ '0.12.0' ], 42 silly audit chalk: [ '4.1.2' ], 42 silly audit chownr: [ '2.0.0' ], 42 silly audit 'cli-cursor': [ '3.1.0' ], 42 silly audit 'cli-spinners': [ '2.6.1' ], 42 silly audit cliui: [ '7.0.4' ], 42 silly audit 'is-fullwidth-code-point': [ '3.0.0', '1.0.0' ], 42 silly audit 'string-width': [ '4.2.3', '1.0.2' ], 42 silly audit 'strip-ansi': [ '6.0.1', '3.0.1' ], 42 silly audit clone: [ '1.0.4' ], 42 silly audit 'clone-response': [ '1.0.2' ], 42 silly audit 'code-point-at': [ '1.1.0' ], 42 silly audit 'color-convert': [ '2.0.1' ], 42 silly audit 'color-name': [ '1.1.4' ], 42 silly audit colors: [ '1.4.0' ], 42 silly audit 'combined-stream': [ '1.0.8' ], 42 silly audit 'compress-brotli': [ '1.3.6' ], 42 silly audit 'concat-map': [ '0.0.1' ], 42 silly audit 'console-control-strings': [ '1.1.0' ], 42 silly audit 'core-util-is': [ '1.0.3', '1.0.2' ], 42 silly audit 'cross-spawn': [ '7.0.3' ], 42 silly audit dashdash: [ '1.14.1' ], 42 silly audit debug: [ '4.3.3' ], 42 silly audit 'decompress-response': [ '6.0.0' ], 42 silly audit 'mimic-response': [ '3.1.0', '1.0.1' ], 42 silly audit defaults: [ '1.0.3' ], 42 silly audit 'defer-to-connect': [ '2.0.1' ], 42 silly audit 'delayed-stream': [ '1.0.0' ], 42 silly audit delegates: [ '1.0.0' ], 42 silly audit 'detect-libc': [ '1.0.3' ], 42 silly audit 'ecc-jsbn': [ '0.1.2' ], 42 silly audit 'emoji-regex': [ '8.0.0' ], 42 silly audit 'end-of-stream': [ '1.4.4' ], 42 silly audit 'env-paths': [ '2.2.1' ], 42 silly audit epoll: [ '4.0.1' ], 42 silly audit escalade: [ '3.1.1' ], 42 silly audit extend: [ '3.0.2' ], 42 silly audit extsprintf: [ '1.3.0' ], 42 silly audit 'fast-deep-equal': [ '3.1.3' ], 42 silly audit 'fast-json-stable-stringify': [ '2.1.0' ], 42 silly audit 'file-uri-to-path': [ '1.0.0' ], 42 silly audit 'forever-agent': [ '0.6.1' ], 42 silly audit 'form-data': [ '2.3.3' ], 42 silly audit 'fs-extra': [ '9.1.0' ], 42 silly audit 'fs-minipass': [ '2.1.0' ], 42 silly audit 'fs.realpath': [ '1.0.0' ], 42 silly audit gauge: [ '2.7.4' ], 42 silly audit 'get-caller-file': [ '2.0.5' ], 42 silly audit 'get-stream': [ '5.2.0' ], 42 silly audit getpass: [ '0.1.7' ], 42 silly audit glob: [ '7.2.0' ], 42 silly audit got: [ '11.8.3' ], 42 silly audit 'graceful-fs': [ '4.2.9' ], 42 silly audit 'har-schema': [ '2.0.0' ], 42 silly audit 'har-validator': [ '5.1.5' ], 42 silly audit 'has-flag': [ '4.0.0' ], 42 silly audit 'has-unicode': [ '2.0.1' ], 42 silly audit 'http-cache-semantics': [ '4.1.0' ], 42 silly audit 'http-signature': [ '1.2.0' ], 42 silly audit 'http2-wrapper': [ '1.0.3' ], 42 silly audit ieee754: [ '1.2.1' ], 42 silly audit inflight: [ '1.0.6' ], 42 silly audit inherits: [ '2.0.4' ], 42 silly audit 'is-interactive': [ '1.0.0' ], 42 silly audit 'is-typedarray': [ '1.0.0' ], 42 silly audit 'is-unicode-supported': [ '0.1.0' ], 42 silly audit isarray: [ '1.0.0' ], 42 silly audit isexe: [ '2.0.0' ], 42 silly audit isstream: [ '0.1.2' ], 42 silly audit jsbn: [ '0.1.1' ], 42 silly audit 'json-buffer': [ '3.0.1' ], 42 silly audit 'json-schema': [ '0.4.0' ], 42 silly audit 'json-schema-traverse': [ '0.4.1' ], 42 silly audit 'json-stringify-safe': [ '5.0.1' ], 42 silly audit jsonfile: [ '6.1.0' ], 42 silly audit jsprim: [ '1.4.2' ], 42 silly audit keyv: [ '4.2.0' ], 42 silly audit 'lodash.debounce': [ '4.0.8' ], 42 silly audit 'log-symbols': [ '4.1.0' ], 42 silly audit 'lowercase-keys': [ '2.0.0' ], 42 silly audit 'lru-cache': [ '6.0.0' ], 42 silly audit 'magicmirror-rebuild': [ '1.0.5' ], 42 silly audit 'mime-db': [ '1.52.0' ], 42 silly audit 'mime-types': [ '2.1.35' ], 42 silly audit 'mimic-fn': [ '2.1.0' ], 42 silly audit minimatch: [ '3.1.2' ], 42 silly audit minipass: [ '3.1.6' ], 42 silly audit minizlib: [ '2.1.2' ], 42 silly audit mkdirp: [ '1.0.4' ], 42 silly audit ms: [ '2.1.2' ], 42 silly audit nan: [ '2.15.0' ], 42 silly audit 'node-abi': [ '3.8.0' ], 42 silly audit 'node-gyp': [ '7.1.2' ], 42 silly audit nopt: [ '5.0.0' ], 42 silly audit 'normalize-url': [ '6.1.0' ], 42 silly audit npmlog: [ '4.1.2' ], 42 silly audit 'number-is-nan': [ '1.0.1' ], 42 silly audit 'oauth-sign': [ '0.9.0' ], 42 silly audit 'object-assign': [ '4.1.1' ], 42 silly audit once: [ '1.4.0' ], 42 silly audit onetime: [ '5.1.2' ], 42 silly audit onoff: [ '6.0.3' ], 42 silly audit ora: [ '5.4.1' ], 42 silly audit 'p-cancelable': [ '2.1.1' ], 42 silly audit 'path-is-absolute': [ '1.0.1' ], 42 silly audit 'path-key': [ '3.1.1' ], 42 silly audit 'performance-now': [ '2.1.0' ], 42 silly audit 'process-nextick-args': [ '2.0.1' ], 42 silly audit psl: [ '1.8.0' ], 42 silly audit pump: [ '3.0.0' ], 42 silly audit punycode: [ '2.1.1' ], 42 silly audit qs: [ '6.5.3' ], 42 silly audit 'quick-lru': [ '5.1.1' ], 42 silly audit request: [ '2.88.2' ], 42 silly audit 'require-directory': [ '2.1.1' ], 42 silly audit 'resolve-alpn': [ '1.2.1' ], 42 silly audit responselike: [ '2.0.0' ], 42 silly audit 'restore-cursor': [ '3.1.0' ], 42 silly audit rimraf: [ '3.0.2' ], 42 silly audit 'safe-buffer': [ '5.1.2' ], 42 silly audit 'safer-buffer': [ '2.1.2' ], 42 silly audit semver: [ '7.3.5' ], 42 silly audit 'set-blocking': [ '2.0.0' ], 42 silly audit 'shebang-command': [ '2.0.0' ], 42 silly audit 'shebang-regex': [ '3.0.0' ], 42 silly audit 'signal-exit': [ '3.0.7' ], 42 silly audit sshpk: [ '1.17.0' ], 42 silly audit string_decoder: [ '1.1.1' ], 42 silly audit 'supports-color': [ '7.2.0' ], 42 silly audit tar: [ '6.1.11' ], 42 silly audit 'tough-cookie': [ '2.5.0' ], 42 silly audit 'tunnel-agent': [ '0.6.0' ], 42 silly audit tweetnacl: [ '0.14.5' ], 42 silly audit universalify: [ '2.0.0' ], 42 silly audit 'uri-js': [ '4.4.1' ], 42 silly audit 'util-deprecate': [ '1.0.2' ], 42 silly audit uuid: [ '3.4.0' ], 42 silly audit verror: [ '1.10.0' ], 42 silly audit wcwidth: [ '1.0.1' ], 42 silly audit which: [ '2.0.2' ], 42 silly audit 'wide-align': [ '1.1.5' ], 42 silly audit 'wrap-ansi': [ '7.0.0' ], 42 silly audit wrappy: [ '1.0.2' ], 42 silly audit y18n: [ '5.0.8' ], 42 silly audit yallist: [ '4.0.0' ], 42 silly audit yargs: [ '16.2.0' ], 42 silly audit 'yargs-parser': [ '20.2.9' ] 42 silly audit } 43 timing reify:unpack Completed in 15ms 44 timing reify:unretire Completed in 1ms 45 timing build:queue Completed in 0ms 46 timing build:deps Completed in 2ms 47 timing build Completed in 2ms 48 timing reify:build Completed in 5ms 49 timing reify:trash Completed in 0ms 50 timing reify:save Completed in 241ms 51 http fetch POST 200 https://registry.npmjs.org/-/npm/v1/security/advisories/bulk 1100ms 52 timing auditReport:getReport Completed in 1128ms 53 silly audit report {} 54 timing auditReport:init Completed in 0ms 55 timing reify:audit Completed in 1132ms 56 timing reify Completed in 2781ms 57 timing command:install Completed in 2932ms 58 verbose stack Error: command failed 58 verbose stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/@npmcli/promise-spawn/index.js:64:27) 58 verbose stack at ChildProcess.emit (node:events:390:28) 58 verbose stack at maybeClose (node:internal/child_process:1064:16) 58 verbose stack at Process.ChildProcess._handle.onexit (node:internal/child_process:301:5) 59 verbose pkgid EXT-Pir@1.0.1 60 verbose cwd /home/pi/MagicMirror/modules/EXT-Pir 61 verbose Linux 5.10.63-v7+ 62 verbose argv "/usr/bin/node" "/usr/bin/npm" "install" 63 verbose node v16.13.0 64 verbose npm v8.1.4 65 error code 255 66 error path /home/pi/MagicMirror/modules/EXT-Pir 67 error command failed 68 error command sh -c installer/preinstall.sh 69 verbose exit 255

Thank you in advance for your help.
Many thanks to @bugsounet for the great work on all modules.

Have a nice day.

Cheers,

I’ve used the old MagicMirror plug-in and Switched to the new version.
I’ve changed the GPIO to 21 as i am
Using this one and it worked with the older version.
Also I am using the mode 6 as described.
Is this right?
Is there anything else that I’ll need to change?
Plugin is installed.

I will add my config later to proof it has been configured well.

Anyone else struggling when moving to the new plug in?

Hello everyone

I just installed the module EXT-Pir, but it is not working.
First I did this:

cd ~/MagicMirror/modules git clone https://github.com/bugsounet/EXT-Pir cd EXT-Pir npm install

Then i put this code in the config.js

{ module: 'EXT-Pir', config: { gpio: 21, reverseValue: false } },

When i start the Mirror, then its jut normal working.
It does not shut down if there is no movement.

What can i do now? I have to get it working. I need this for school

Sorry for my bad english .-.