I cannot get the google assistant to recognize the voice commands. Below is config.js:
MagicMirror² Config Sample
By Michael Teeuw
https://michaelteeuw.nl
MIT Licensed.
For more information on how you can configure this file
see
https://docs.magicmirror.builders/configuration/introduction.html
and
https://docs.magicmirror.builders/modules/configuration.html
*/
let config = {
address: “localhost”, // Address to listen on, can be:
// - “localhost”, “127.0.0.1”, “::1” to listen on loopback interface
// - another specific IPv4/6 to listen on a specific interface
// - “0.0.0.0”, “::” to listen on any interface
// Default, when address config is left out or empty, is “localhost”
port: 8080,
basePath: “/”, // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
// you must set the sub path here. basePath must end with a /
ipWhitelist: [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”], // Set [] to allow all IP addresses
// or add a specific IPv4 of 192.168.1.5 :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.1.5”],
// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.3.0/28”],
useHttps: false, // Support HTTPS or not, default “false” will use HTTP
httpsPrivateKey: “”, // HTTPS private key path, only require when useHttps is true
httpsCertificate: “”, // HTTPS Certificate path, only require when useHttps is true
language: “en”,
locale: “en-US”,
logLevel: [“INFO”, “LOG”, “WARN”, “ERROR”], // Add “DEBUG” for even more logging
timeFormat: 24,
units: “metric”,
// serverOnly: true/false/“local” ,
// local for armv6l processors, default
// starts serveronly and then starts chrome browser
// false, default for all NON-armv6l devices
// true, force serveronly mode, because you want to… no UI on this device
modules: [
{
module: “alert”,
},
{
module: “updatenotification”,
position: “top_bar”
},
{
module: “clock”,
position: “top_left”
},
//{
//module: ‘MMM-Instagram’,
//position: ‘top_right’,
//config: {
//access_token: ‘API_KEY from instagram’,
//count: 200,
//min_timestamp: 0,
//animationSpeed: 2500,
//updateInterval: 12500
//}
//},
{
module: “calendar”,
// header: “US Holidays”,
position: “bottom_left”,
config: {
calendars: [
{
// symbol: “calendar-check”,
url: “https://calendar.google.com/calendar/ical/stayl144%40gmail.com/private-5c11d8f69fefbe4fbdd630d7d318c913/basic.ics”,
maximumEntries: 4,
// url: “webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics”
}
]
}
},
{
module: “compliments”,
position: “lower_third”
},
/* this.sendNotification(“EXT_ALERT”, {
type: “information”,
message: “this a sample of notification displayer”,
sender: “@bugsounet”,
sound: “none”
})
{
module: “EXT-Detector”,
position: “top_left”,
configDeepMerge: true,
config: {
debug: false,
useIcon: true,
touchOnly: false,
detectors: [
{
detector: “Snowboy”,
Model: “jarvis”,
Sensitivity: null
},
{
detector: “Porcupine”,
Model: “ok google”,
Sensitivity: null
},
{
detector: “Porcupine”,
Model: “hey google”,
Sensitivity: null
}
]
}
} pcm.!default {
type asym
capture.pcm “mic”
playback.pcm “speaker”
}
pcm.mic {
type plug
slave {
pcm “hw:2,0”
}
}
pcm.speaker{
type plug
slave {
pcm “hcm:1,0”
}
} */
{
module: "MMM-Detector",
position: "top_left",
configDeepMerge: true,
config: {
debug: true,
autoStart: true,
useLogos: true,
micConfig: {
recorder: "arecord",
device: "plughw:2",
audioGain: 2.0,
applyFrontend: true
},
newLogos: {
default: "default.png"
},
detectors: [
{
detector: “Snowboy”,
Model: “jarvis”,
Sensitivity: null,
Logo: “google”,
autoRestart: false,
onDetected: {
notification: “GA_ACTIVATE”
}
},
{
detector: “Porcupine”,
Model: “ok google”,
Sensitivity: null,
Logo: “google”,
autoRestart: false,
onDetected: {
notification: “GA_ACTIVATE”
}
},
{
detector: “Porcupine”,
Model: “hey google”,
Sensitivity: null,
Logo: “google”,
autoRestart: false,
onDetected: {
notification: “GA_ACTIVATE”
}
}
],
NPMCheck: {
useChecker: true,
delay: 10 * 60 * 1000,
useAlert: true
}
}
},
{
module: "MMM-GoogleAssistant",
position: "top_left",
configDeepMerge: true,
config: {
debug: false,
assistantConfig: {
lang: "en-US",
latitude: 3.04384,
longitude: 101.58062,
},
responseConfig: {
useFullscreen: false,
useResponseOutput: true,
responseOutputCSS: "screen_output.css",
sreenOutputTimer: 5000,
activateDelay: 250,
useAudioOutput: true,
useChime: true,
confirmationChime: true,
useInformations: true
},
micConfig: {
recorder: “arecord”,
device: “plughw:2”
},
Extented: {
useInternet: false,
displayPing: false,
delay: 2* 60 * 1000,
scan: “google.fr”,
command: “pm2 restart 0”,
showAlert: true,
needRestart: false
}
}
},
{
module: ‘Gateway’
},
{
module: “MMM-GoogleAssistant”,
configDeepMerge: true,
config: {
debug: false,
stopCommand: “stop”,
assistantConfig: {},
responseConfig: {
chimes:{},
imgStatus:{},
zoom: {}
},
recipes: []
}
},
{
module: “weather”,
position: “bottom_left”,
config: {
weatherProvider: “openweathermap”,
type: “current”,
location: “New York”,
locationID: “5128581”, //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
apiKey: “YOUR_OPENWEATHER_API_KEY”
}
},
{
module: “weather”,
position: “top_right”,
header: “Weather Forecast”,
config: {
weatherProvider: “openweathermap”,
type: “forecast”,
location: “New York”,
locationID: “5128581”, //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
apiKey: “YOUR_OPENWEATHER_API_KEY”
}
},
{
module: “newsfeed”,
position: “bottom_bar”,
config: {
feeds: [
{
title: “New York Times”,
url: “https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml”
}
],
showSourceTitle: true,
showPublishDate: true,
broadcastNewsFeeds: true,
broadcastNewsUpdates: true
}
},
]
};
/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}
